• Standard D05 interface, optional D03
• SAE O-ring ports for access to P & T
• Removable NPT orifice plug options
• Ships standard with an orifice installed in the “P” port & according to Plug option #1
Dump Valve or ON/OFF valve
Can be used as a dump valve by Connecting “X” to the “B” port (side of insert) & connecting “Y” to the drain. The diagrams to the right show the two different plug options. Plug option #1 will allow the valve to dump in the de-energized state & Plug option #2 will allow the valve to dump in the energized state.
Note: If port “A” is connected to a working port, then connecting “X” to the “B” port as shown above does not prevent pressure at A from overcoming the forces acting to keep the valve closed. Flow could occur from A to B. To prevent this use a separate pilot pressure for X.
Standard D05 Interface Layout (80mm not shown)
Optional D03 Interface (80mm not shown)
Chart for standard D03 interface
Only one orifice installed in ‘P’ port of D05 interface. Other orifices are optional